Blog

Read our latest technical newsletter, MIM tips for designers & press releases.

What's new

September 16, 2026

Scientific quality assurance behind μ-MIM Components

In metal injection moulding (MIM), besides controlling the dimensional accuracy, satisfying the mechanical properties is essential.

Exhibiting at EPHJ – The World of High Precision 2026

Press releases

May 21, 2026

Exhibiting at EPHJ – The World of High Precision 2026

We will exhibit at EPHJ – The World of High Precision 2026, held at PALEXPO, Geneva, from June 16–19, 2026.

Technical Newsletter Vol.58

μ-MIM® Technical Newsletter

February 5, 2026

Latest Trends in Metal 3D Printing

At Formnext in Frankfurt in November 2025, the exhibition area expanded significantly, reflecting the rapid growth of additive manufacturing technologies.

Technical Newsletter Vol.57

μ-MIM® Technical Newsletter

December 17, 2025

【2025 Year in Review】TOP 3 Most Popular Technical Topics Among Our Readers!

As the year draws to a close, we hope this message finds you in good health and continued prosperity. We sincerely appreciate your generous support and patronage throughout the year.

MIM Design Tips #04

MIM tips for designers

August 23, 2019

Manufacturing / Hole

Apply dummy boss in front of the feedstock confluence point to minimise the weld line defects.

MIM Design Tips #03

MIM tips for designers

April 26, 2019

Manufacturing / Corner

Apply curve or chamfered corner to avoid demoulding or inhomogeneous problems.

MIM Design Tips #02

MIM tips for designers

April 25, 2019

Manufacturing / Thickness Pt. 2

Either eliminating the sudden huge thickness change or giving curve at the corner will minimise the problems above mentioned.

MIM Design Tips #01

MIM tips for designers

April 24, 2019

Manufacturing / Thickness Pt. 1

If the thick design is necessary, hollow out from the possible side. These hollows will help to avoid the sink mark or void. Also it helps minimise the unit price.